How to use the VapCap M 2020 vaporizer correctly?

VapCap M 2020 is one of those vaporizers that have quickly gained recognition among users around the world. One of its biggest advantages – right after the quality of the steam – is the fact that you do not have to worry about the battery level. The Vaporizer is always ready to work, because you only need to use a butane lighter to warm up the herbs. However, many people ask themselves, how to use VapCap correctly? Especially for you we have prepared a short guide on how to heat up VapCap. We encourage not only beginners but also people who have had the device for a long time to get to know it – check if you do it right!


VapCap M 2020 – a cultic vaporizer that is second to none


The VapCap M 2020 is one of the most recognizable and valued devices among fans of vaporization. So far several versions of it have been developed: VapCap M 2020, and later VapCap M 2020 and 2019. The latest VapCap M 2020 Vaporizer impresses in every respect. Original design is combined here with the highest functionality, which provides great pleasure, which comes with this device. What is important is that this vaporizer is very efficient. Just 0.1 g of herbs is enough to enjoy the aroma and excellent steam quality.


One of the things that make all generations of VapCap M stand out is the method of heating up the dryer. It is a manual vaporizer – to use it, you need to heat the chamber with an external heat source. For this purpose it is best to use a special butane lighter, which is the most comfortable and at the same time the most effective. With the right lighter, this premium vaporizer will delight you with its capabilities.


How to heat the VapCap M 2020 Vaporizer?


The operation of the VapCap M 2020 Vaporizer may seem unclear at first, but in fact it is very simple. After a few attempts you will have no problem with it. If you have not yet decided to buy the device because you are afraid that you will not be able to handle it, it is time to dispel these doubts. Everyone, even a beginner user of vaporizers, can handle it perfectly. However, there are several rules to remember.


The way VapCap M 2020 works is very simple. When it is heated to the optimal temperature, the heating chamber cap will signal it with a specific click. If, on the other hand, the temperature drops below the appropriate temperature, the device will make this sound again – a sign that you can use the butane lighter again.


Choosing the right burner for the VapCap M 2020


What accessories for vaporizers will I need for VapCap M 2020? The type of lighter is very important here. If you use an ordinary lighter, it can take a very long time to heat up the dryer, and the soot residue will start to appear on the surface of the machine, which will look very unsightly and may soil your fingers or clothes.


A hot lighter or jet-flame burner will work much better. When choosing an incandescent lighter you may encounter models that have one or more nozzles from which the flames come out. The principle is simple – the more nozzles, the higher the temperature and the wider the heating area, and the time needed to heat up the VapCap is shorter. However, it is best to opt for a lighter with one nozzle, as this will allow you to heat up a specific area on the cap of the device. It is also worthwhile to have a lighter with three or four nozzles – it will work if you want to use the vaporizer outside the house and you want to heat up the chamber as quickly as possible.


Where to heat the cap?


It is also worth mentioning here that the place where the cap is heated is very important. The further away from the tip of the cap you will be heating it, the higher the temperature will be when you click. Conversely, the closer to the tip of the cap, the lower the temperature will be. This will translate into the amount and density of steam and its taste. It is best to heat the cap approximately in the middle of the DynaVap inscription, which is on its surface – this is the most safe for the cap itself as well as for the drought in the device.


The right distance from the flame is important!


Another important thing is how to hold the lighter. You should definitely not bring it too close to the cap itself. The end of the flame should be about 1-1.5 cm from the appliance. Otherwise there is a risk of uneven heating of the drought or, in extreme cases, overheating and burning. At first, keeping the fire at the right distance may seem complicated, but after a few inhalations it will stop causing any problems.


Remember to rotate the appliance

In order for the dryer to be evenly heated, the vaporizer should be rotated 360 degrees in fingers at all times. It is not very complicated – a stable handle is enough, and turning the VapCap M 2020 will not make any difficult


Remember to rotate the device


In order for the dryer to be evenly heated, the vaporizer should be rotated 360 degrees in fingers at all times. It is not very complicated – a stable handle is enough and turning the VapCap M 2020 will not cause any difficulties. On the contrary, using an external heat source and having to rotate the device is all the fun of using the manual vaporizer. Remember: when you hear a click, stop heating the VapCap M 2020 immediately.


What possibilities does the air intake offer?


The VapCap M 2020 is equipped with a special air intake, commonly known as a “clutch”. – How you use it depends on your preferences. If you close it completely, you will get a very dense and intense cloud, but the pulling will be a bit slower – the steam can then be quite warm, sometimes even hot. For this reason, like the manufacturer, we recommend not to completely cover the “clutch” during inhalation or to cover it only partially. What are the benefits of this?


If you open the “clutch”, the amount of visible vapor will not be so great, but you will pull yourself in without any resistance. The temperature of the steam will also be comfortable and will not irritate your throat. You can also close it halfway with your finger – this way you will leave some room for air from outside. It is worth trying to find your “golden mean” – you will surely find the configuration that is most optimal for you.


How to use the Vap Cap M 2019? It’s really easy!


The whole secret is to… respect the click of a device. The Vaporizer has been designed in such a way that using it is really comfortable. If you hear a click, it is a sign that the drought has reached the optimal temperature – it is time to start inhaling. If the vaporizer clicks again, you can heat it up again. And that is all! If you follow the rules described above, after just two or three inhalations, you will have no difficulty handling the device.


Manual vaporizers are becoming more and more popular – not only because of the lack of batteries, but also because of the pleasure of heating up the drought yourself. This makes inhalation more relaxing and becomes a kind of ritual, culminating in the ability to enjoy the unique aroma and quality of steam. VapCap M 2020 Vaporizer is definitely one of the best butane vaporizers available on the market.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top